Gary Fleisher, Modular Construction Industry Observer and Information Gatherer

Modcoach’s Modular “Home of the Week”

Superior Builders
Heckaman Homes
MBSP
Icon Legacy
Apex Homes
Ritz-Craft
New Era
Muncy Homes
Westchester
Premier Builders

Share This Post

This week’s modular “Home of the Week” comes from the Architects at Teke Architects Office in Genoa, Italy. Not only did I find this to be one of the beautiful modular homes I’ve ever seen, it also shows what is possible when dreams become reality.

This design and how it is assembled is truly fascinating and shows modular construction is being embraced around the world and especially in the offices of Onur Teke and his exceptional team of Architects. Contact them at: contact@tekearchitects.com

Heister House
PFS Corporation
Mariotti Building Products

The Modular Unit (MU50) is a small-scale, modular, off-grid structure, designed to be recyclable and adaptable to a wide variety of sites. Through its simplicity, flexibility and choice of materials, this structure is intended to bring beauty to the users’ daily lives; to allow them to incorporate it in their quotidian landscape and to connect with the surrounding nature reducing at most its carbon footprint. 

A single module consists of two untreated Larch timber frames and the enclosure between them. The structural frames and the enclosure define the shell of the project, while its interior core consists of a separately constructed service pod with amenities and storage space. 

The pod includes the bathroom and kitchen as well as necessary storage space. Glazing on all sides of the building allows visual transparency and creates a sense of openness and continuity between the interior and the surrounding landscape. The exterior decks, protected at different times of the day by manually operated timber shades, offer a variety of micro-climatic outdoor experiences generated by the sun and wind conditions that change as one moves around the unit.

The structural Larch-wood frames and the enclosure panels were prefabricated and then easily mounted on site reducing the installation time. Details of the steep gable-roof cover were developed for three possible building materials – wood, aluminum and copper; the latest material was used to cover MU50. This is a multi-layered passive climatic control surface: while the thermal insulation and water proofed panel finish above the laminated wood roof structure provides the function of a conventional system; copper surface mounted above the actual roof surface provide an efficient passive control and reduction of heat gain, by creating continuous air movement and shading above the unit. This roof also houses the photovoltaic and solar panels, making them an integrated component of the design language.

The unit incorporates technologies that reduce its environmental impact. A simple, open plan allows natural lighting and facilitates cross ventilation. The transparent surfaces designed to receive maximum daylight into the interior spaces minimize the necessity for artificial lighting. The high-pitched gable roof houses the photovoltaic panels to produce electricity and solar panels to heat water. Ground source heat pump and underfloor heating constitute an efficient system that makes use of minimal energy. The floor of the unit is raised above the ground, which allows air circulation below its surface. Building orientation, custom made double pane glazing and piston-operated pine sunshades all protect the interior from direct sunlight.

The modular system used to build MU50 was designed to allow a wide range of building uses, reduce environmental impact and maximize site flexibility. 

The elements of this modular system can be varied in number and materials to house different building functions. As more structural frames are added, the building becomes larger; it can remain a singular, simple, rectangular space, or it can be subdivided by one or more service pods. Thus, a simple act of repeating and combining a small number of relatively simple building elements can produce a wide variety of spaces fit for different uses – from a small meditation room to a dwelling.

As a basic principle, regardless of the building use or choice of site, the modular system elements are designed to be constructed in reusable and recyclable materials which are easily available and can be assembled by local builders on any specific site. This fundamental design choice ensures reduced environmental impact for any specific building size or use. Simple spatial configurations that result from repetition of the basic elements facilitate natural lighting and ventilation. Water collecting and energy producing systems can be added to the basic units to make them completely off-grid.

I want to personally thank Onur Teke for helping me present this home to our residential modular industry.

MU50 from TEKE Architects Office on Vimeo.

2 Responses

Leave a Reply

Subscribe To Our Newsletter

Get updates and learn from the best


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

More To Explore

Sica Modular Homes
Griffith Homebuilders
Saratoga Modular Homes
Go Modular SIP
Select Modular Homes
Hudson Valley Homes


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Subscribe

Receive industry insights twice a week